User`s manual

CONTROLS AND CONNECTIONS
37 | PreSonus 2008
3.4.1 Channel Fader Controls
Each input and playback stream is equipped with its own fader strip. This strip has all the same features as a
classic physical console.
 Channel Fader
The fader controls the volume of the signal on any given output.
The signal is metered in realtime directly to the right of the fader.
 Pan Slider
Above each fader you will see a box with a vertical line. This is
your pan control. As you move the pan to the left or right of
center, the “C” below it will change to reflect that channel’s
current pan position.
 Realtime Decibel Readout
Above the meter on each channel strip, you will see a number.
This is the dB level of the signal beign routed to that ouput.
 Fader Attenuation
Below the meter, you will see the fader attenuation (-96 to 0dB).
0dB is unity and is achieved by raising the fader all the way up.
-96dB represents the fader at its lowest position.
 Mute button
Below each fader is the mute button for that channel. Engaging
the mute button will mute that input or playback stream on the
current mix only.
 Solo button
Below each meter is the solo button for that channel. Engaging
the solo button will mute all other inputs and playback streams
that are not also soloed in the current mix.