Owners Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 Features
- 1.3 What’s in the Box
- 2 Getting Started
- 2.1 Quick Start Guide
- 2.1.1 Connecting the Monitor Station V2’s Power
- 2.1.2 Connecting Devices to the Monitor Station V2’s Inputs
- 2.1.3 Calibrating the Monitor Station V2’s LED Meter
- 2.1.4 Setting the Output Level of Your Audio Sources
- 2.1.5 Connecting Speakers to the Monitor Station V2
- 2.1.6 Calibrating Your Speaker Levels
- 2.1.7 Calibrate the Talkback Microphone
- 2.1.8 Connect the Cue Outputs
- 2.1.9 Connect the Main Outputs
- 2.2 Basic Hookup Diagram
- 2.3 Advanced Modes
- 2.3.1 Speaker Select Modes
- 2.3.2 Main and Cue Source Modes
- 2.3.3 Input LED Meter Modes
- 2.3.4 Reset All Modes to the Factory Default
- 3 Hookup
- 3.1 The Back Panel
- 3.1.1 Inputs
- 3.1.2 Speaker Outputs
- 3.1.3 Line Outputs
- 3.1.4 Power
- 4 Controls
- 4.1 The Front Panel
- 4.1.1 Talkback
- 4.1.2 Cue Control
- 4.1.3 Aux Control
- 4.1.4 Main Source Control
- 4.1.5 Speaker Control
- 4.1.6 Main Level Controls
- 5 Resources
- 5.1 Audio Specifications
- 5.2 Frequently Asked Questions
- 5.3 Troubleshooting
- 5.4 PreSonus Limited Warranty
3 Hookup
3.1 The Back Panel
Monitor Station V2
Owner’s Manual
14
3 Hookup
3.1 The Back Panel
3.1.1 Inputs
ST1 L/R: Connect the left and right channels of your primary
stereo source to these balanced ¼” TRS jacks.
ST2 L/R: Connect the left and right channels of your secondary
stereo source to these balanced ¼” TRS jacks.
S/PDIF: Connect a digital audio device with an S/PDIF output to this RCA digital
input. The Monitor Station V2 supports sample rates of 44.1, 48, 88.2, and 96 kHz.
L/R Aux: Connect the left and right channels of an auxiliary
analog audio device to these unbalanced RCA jacks.
Aux In: Connect the headphone jack of a phone, portable music player, or
other device with a stereo 1/8” output to this unbalanced, 1/8” stereo input.
3.1.2 Speaker Outputs
Speaker A L/R Outputs: Connect your primary powered-
speaker system to the balanced A L/R Speaker Outputs.