Owners Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 About This Manual
- 1.3 What’s in the Box
- 1.3.1 What Else You Need
- 1.4 Companion PreSonus Products
- 2 Getting Started
- 2.1 Direct connect with a StudioLive Series III mixer
- 2.2 Direct connect with a StudioLive Series III rack mixer
- 2.3 Using an NSB-series Stage Box with Two or More Mixers
- 3 Gain Compensation
- 3.1 Remote Preamp Control (Console Mixers)
- 3.2 Remote Preamp Control (UC Surface)
- 4 Hookup
- 4.1 Front-Panel Connections
- 4.2 Left-panel Connections
- 4.3 Right-panel Connections
- 5 Technical Information
- 5.1 Specifications
- 6 Warranty
- 6.1 Warranty Information
14
2 Getting Started
2.3 Using an NSB-series Stage Box with Two or More Mixers
NSB-Series Stageboxes
Owner’s Manual
In our example, we will be routing the last 8 FlexMixes from the
StudioLive 24R to the physical outputs on the NSB 8.8.
1. In Universal Control, connect to the StudioLive 24R.
2. Click or tap on the Settings Icon.
3. Click or tap on the Network Tab.
4. In the Stagebox Setup area, select the NSB 8.8.
5. From the drop-down menu, select StudioLive 24R Sends 49-56.
6. Press the Apply button when finished.