Owners Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 About This Manual
- 1.3 What’s in the Box
- 1.3.1 What Else You Need
- 1.4 Companion PreSonus Products
- 2 Getting Started
- 2.1 Direct connect with a StudioLive Series III mixer
- 2.2 Direct connect with a StudioLive Series III rack mixer
- 2.3 Using an NSB-series Stage Box with Two or More Mixers
- 3 Gain Compensation
- 3.1 Remote Preamp Control (Console Mixers)
- 3.2 Remote Preamp Control (UC Surface)
- 4 Hookup
- 4.1 Front-Panel Connections
- 4.2 Left-panel Connections
- 4.3 Right-panel Connections
- 5 Technical Information
- 5.1 Specifications
- 6 Warranty
- 6.1 Warranty Information
18
2 Getting Started
2.3 Using an NSB-series Stage Box with Two or More Mixers
NSB-Series Stageboxes
Owner’s Manual
Your StudioLive 24R is now configured as follows:
• Channels 1-8: Network sourced from StudioLive 32SX Inputs 1-9
• Channels 9-16: No network source available. Local sources only (Analog or USB)
• Channels 17-24: No network source available. Local sources only (Analog or USB)
• Channels 25-32: Network sourced from NSB8.8 Inputs 1-8.
Step 8: Engaging the Network Sources on your Rack Mixer
1. Click or tap on the Digital Patching tab.
2. Click or tap on the Input Source tab.
3. Click or tap on the AVB tab.
4. Click or tap on the icon on Channels 1-8 and Channels 25-32. This will assign the
source for each of these channels to the AVB network.