Owners Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 About This Manual
- 1.3 What’s in the Box
- 1.3.1 What Else You Need
- 1.4 Companion PreSonus Products
- 2 Getting Started
- 2.1 Direct connect with a StudioLive Series III mixer
- 2.2 Direct connect with a StudioLive Series III rack mixer
- 2.3 Using an NSB-series Stage Box with Two or More Mixers
- 3 Gain Compensation
- 3.1 Remote Preamp Control (Console Mixers)
- 3.2 Remote Preamp Control (UC Surface)
- 4 Hookup
- 4.1 Front-Panel Connections
- 4.2 Left-panel Connections
- 4.3 Right-panel Connections
- 5 Technical Information
- 5.1 Specifications
- 6 Warranty
- 6.1 Warranty Information
21
3 Gain Compensation
3.2 Remote Preamp Control (UC Surface)
NSB-Series Stageboxes
Owner’s Manual
After you have set the preamp levels, enable Gain Compensation.
This will turn on Gain Compensation for that input and allow
other mixers on the network to source that stream.
Note: If you do not enable Gain Compensation, making a change on the mixer with
preamp control over the NSB stage box will change it for any device listening to that
stream on the network.