User Manual

8
2 Getting Started
2.2 Direct connect with a StudioLive Series III rack mixer
NSB-Series Stageboxes
Owner’s Manual
2.2 Direct connect with a StudioLive Series III rack mixer
With the exception of the StudioLive 16R, every StudioLive Series III mixer is
a 36x18 channel mixer, regardless of its complement of onboard I/O. In this
example, we will be looking at using one NSB8.8 to expand the I/O capability
of the StudioLive 24R rack mixer, so that it has 32 inputs and 16 outputs.
Connect your NSB8.8 to your StudioLive 24R as shown
below and power on your equipment:
Step 1: Connect Your Stage Box to Your Mixer
1. Launch UC Surface and connect to your StudioLive 24R.
2. Click or Tap on the Settings Gear.
3. Click or Tap on the Network tab.
4. In the Stagebox Setup area, select the NSB8.8 from the list.
Power User Tip: In applications where you are using multiple NSB-series stage boxes
of the same model, you can press the Identify button. This will flash the Power
Network LED on the front of the selected NSB stage box from green to red, allowing
you to quickly locate your selection.
StudioLive 24R Digital Console Mixer
Rear View
Ethernet cable
NSB8.8 AVB Network Stagebox
Side View