User Manual

31
6 Studio One Artist Quick Start
6.3 Creating a New Song
Quantum-series
Owner’s Manual
4. Click on the Outputs tabs to enable any or all of the outputs on your
Quantum audio interface. In the lower right corner, you will see the
Audition select menu. This allows you to choose the output from which
you will audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the main output bus.
Power User Tip: If you would like this I/O configuration to be the same every time you
open Studio One, click the Make Default button.
Studio One allows you to create monitor mixes right from the console.
To enable this function, you must designate at least one output pair to
be a Cue Mix output. Click on the Cue Mix box next to any output pair
you’d like to use as a monitor mix output to enable this feature.
For more information, see Section 6.4.
6.3.2 Creating Audio and MIDI Tracks
1. In the upper left corner of the Arrange window, you will notice
several buttons. The button furthest to the right is the Add Tracks
button. Click on this button to open the Add Tracks window.
2. In the Add Tracks window, you can customize the track name and
color, add a preset rack of effects, and set the physical source for
the input and output of your audio tracks. Most important, you
can select the number and type of tracks you’d like to create.
Power User Tip: If you’d like the Talkback mic available for your session, create a
track with the Talkback input (Input 27) set as the source. This will allow you to route
it to your Cue Mix outputs. See Section 6.5.