User Manual

3
R65 and R80 Owner’s Manual
2 Hookup
2.1 Rear Panel Connections and Controls
2.1.1 Inputs
Line-level Inputs. The R65/R80 provides a choice of
three inputs: two balanced (XLR and 1/4” TRS) and one
unbalanced (RCA). These inputs accept a line-level signal
from your audio source and feed that signal to the monitor’s
built-in power amplifiers. When both balanced connections
are in use, the TRS input supersedes the XLR input.
Note: Make sure your audio source’s XLR or ¼” TRS
wiring corresponds to that of the R65/R80.
Input Level: Sets the amount of gain applied to the
input signal. This is not a volume control in the traditional
sense; instead, it sets the level of the input signal before
it is amplified.
-1.5dB
-3dB
-6dB
+1dB
-1.5dB
-4dB
60Hz
80Hz
100Hz
Balanced Unbalanced
INPUT
RCA
TRSXLR
Sleeve:
Ground
Ring:
[-]
Tip:
[+]
12
3
Ground
XLR TRS
[-]
[+]
Acousc
Space
HF Driver
HP Filter
-1.5dB
-3dB
-6dB
Linear
+1dB
-1.5dB
-4dB
Linear
60Hz
80Hz
100Hz
Linear
ACOUSTIC TUNING
Balanced Unbalanced
INPUT
POWER
100-120V~,50-60Hz,T2AL
220-240V~,50-60Hz,T1AL
150W
AC SELECT
RCA
TRS
INPUT
GAIN
MIN
U
MAX
XLR
R80