User Manual

Table of Contents
1 Overview — 1
1.1 Introduction — 1
1.2 About This Manual — 2
1.3 Summary of StudioLive 16.0.2 Hardware
Features — 2
1.4 What is in the Box — 3
1.5 What is in Your My PreSonus account — 3
2 Getting Started — 4
2.1 Level Setting Procedure — 4
3 Hookup — 7
3.1 Rear-Panel Connections — 7
3.2 Typical Basic Band Hookup Diagram — 10
3.3 Business Conference Hookup Diagram — 11
4 The Fat Channel — 12
4.1 The Select Button — 12
4.2 Input Controls — 13
4.3 Dynamics Processing and EQ — 14
4.3.1 Fat Channel Processing Guide — 14
4.3.2 High Pass Filter — 15
4.3.3 Gate — 15
4.3.4 Compressor and Limiter — 16
4.3.5 Equalizer — 18
4.3.6 Dig Out: Recording EQ and
Dynamics — 20
4.4 Fat Channel Presets: Copy, Paste, Load — 21
4.4.1 Copying and Pasting — 21
4.4.2 Loading Fat Channel Presets — 22
4.4.3 Saving Fat Channel Presets — 23
4.4.4 Channel Presets Library — 24
4.5 Metering — 25
4.5.1 StudioLive Metering Controls — 25
5 Basic Controls — 26
5.1 Input Channel Controls — 26
5.2 Aux and FX Buses — 27
5.2.1 Analog Aux Bus Controls — 27
5.2.2 Internal FX Bus Controls — 28
5.2.3 Aux and FX Bus Channel Sends — 28
5.2.4 Creating Monitor Mixes — 29
5.2.5 Creating Internal FX Mixes — 30
5.3 MultiModes — 31
5.3.1 USB Return Mode. — 31
5.3.2 Solo Mode — 31
5.3.3 Mute Button — 32
5.4 Main Output Bus — 32
5.5 Talkback System — 32
5.6 Solo Bus — 33
5.6.1 Using the Solo Bus for Monitoring — 34
5.6.2 Using Solo in Place (SIP)
to Set Up a Mix — 35
5.7 Monitor Bus — 36
6 Digital Effects | Master
Control — 38
6.1 The Digital FX (Effects) Menu — 38
6.1.1 Creating FX Presets — 39
6.1.2 Reverb and its Parameters — 40
6.1.3 Delay and its Parameters — 41
6.1.4 Digital Effects Preset Library — 42
6.1.5 Digital Effects Types — 43
6.2 Scenes — 44
6.2.1 S1: Zero Out (Board Reset) — 44
6.2.2 Creating a Scene — 44
6.2.3 Scene Recall — 45
6.2.4 Fader Locate — 47
6.2.5 AutoStore — 47