User Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 About This Manual
- 1.3 What is in the Box
- 1.4 What is in your My PreSonus Account
- 2 Getting Started
- 2.1 Level-Setting Procedure
- 3 Hookup
- 3.1 Connections and Controls
- 3.1.1 Inputs
- 3.1.2 Outputs
- 3.1.3 Rear Panel Connections
- 3.2 Channel Controls
- 3.2.1 Digital Returns
- 3.3 The Super Channel
- 3.3.1 Pairing a Bluetooth Device
- 3.4 Aux Buses
- 3.4.1 Monitor Bus Controls
- 3.4.2 Creating Monitor Mixes
- 3.5 Internal FX Bus
- 3.5.1 Effects Presets
- 3.5.2 Internal FX Bus Return
- 3.5.3 Creating Internal Effects Mixes
- 3.5.4 Using an External Effects Processor
- 3.6 Master Section Controls
- 3.6.1 Control Room Levels
- 3.7 Typical Band Setup Diagram
- 3.8 Typical Home Studio Setup Diagram
- 4 SD Recording and Playback
- 4.1 SD Recording
- 4.2 SD Playback
- 5 Connecting to a Computer
- 5.1 Installation for Windows
- 5.1.1 Universal Control (Windows only)
- 5.1.2 Loopback Recording (Windows only)
- 5.1.3 Using the StudioLive for System Sound
- 5.2 Installation for macOS
- 5.2.1 Using the StudioLive for System Sound
- 5.3 Using the StudioLive with Popular Audio Applications
- 5.4 Digital Sends and Returns
- 5.4.1 Digital Sends
- 5.4.2 Digital Returns
- 6 Capture 2
- 6.1 Installation Instructions
- 6.1.1 macOS
- 6.1.2 Windows
- 6.2 Start Page
- 6.2.1 Tagging and Organizing a Session
- 6.2.2 Creating a Session
- 6.2.3 Open a Session
- 6.2.4 Audio Device and Sample Rate
- 6.2.5 Options Menu
- 6.3 The Session Page
- 6.3.1 Track Column
- 6.3.2 Transport
- 6.3.3 Time Display
- 6.3.4 Timeline Ruler
- 6.3.5 Navigating the Session
- 6.3.6 Editing Tools
- 6.3.7 Meter Bridge
- 6.3.8 Markers and the Marker List
- 6.4 Recording a Session in Capture
- 6.5 Importing and Exporting Audio Files
- 6.5.1 Importing Audio Files into Capture
- 6.5.2 Export Audio Files
- 6.6 Mixing Your Capture Sessions
- 6.6.1 Exporting Your Final Mix to an Audio File
- 6.6.2 Mixing a Capture 2 Session in Studio One
- 6.6.3 Mixing a Capture 2 Session in a Different Recording Application
- 6.7 Capture 2 Key Commands
- 7 Studio One Artist Quick Start
- 7.1 Installation and Authorization
- 7.2 Setting Up Studio One
- 7.2.1 Configuring Audio Devices
- 7.2.2 Configuring MIDI Devices
- 7.3 Creating a New Song
- 7.3.1 Configuring Your I/O
- 7.3.2 Creating Audio and MIDI Tracks
- 7.3.3 Recording an Audio Track
- 7.3.4 Adding Virtual Instruments and Effects
- 8 Resources
- 8.1 EQ Frequency Guides
- 8.2 Block Diagrams
- 8.2.1 StudioLive AR16c, and AR12c Block Diagram
- 8.2.2 StudioLive AR8c Block Diagram
- 8.3 Recall Sheets
- 8.3.1 AR16c and AR12c Recall Sheet
- 8.3.2 AR8c Recall Sheet
- 8.4 Technical Specifications
- 9 Troubleshooting
- 9.1 Troubleshooting
17
4 SD Recording and Playback
4.1 SD Recording
StudioLive
™
ARc Series
Owner’s Manual
4 SD Recording and Playback
StudioLive ARc-series mixers are equipped with an onboard stereo SD recorder
that allows you to record the main mix as a stereo WAV file to any FAT16-
formatted SD card or FAT32-formatted SDHC card. You can also load stereo
WAV and MP3 files onto an SD or SDHC card to play audio during a show.
4.1 SD Recording
This section explains on how to record the main mix as a stereo WAV file:
1. Insert a FAT16-formatted SD card or FAT32-formatted SDHC card into your
StudioLive ARc mixer. An SD card will provide up to 2 GB of storage space.
An SDHC card will provide up to 32 GB.
2. Press the Record button.
3. Recording will begin when the Play/Pause and
Record buttons are both illuminated.
If no SD card is recognized, the Record button will flash three times.
4. Press the Play/Pause button to stop the recording.
Once complete, you can transfer your recordings onto your computer by
inserting the SD card into your computer’s SD card reader and copying the
files to your computer’s hard drive. Each file will be labeled with an “SL-ARc”
heading, followed by a number.
SD Card