User Manual

42
6 Capture 2
6.3 The Session Page
StudioLive
™
ARc Series
Owner’s Manual
6.3.7 Meter Bridge
Capture 2 provides input and output metering
when a track is being recorded or played back.
These peak-style meters at the bottom of the
Session page feature clip indicators for each input
into Capture 2 from the StudioLive ARc-series mixer.
Record Arm.
Below each meter, you will find another Record Arm button. This button provides the
same functionality as the Record Arm button in the Track column. See Section 6.3.1
for more information.
Link Button.
Between each meter you will find a Link button. When this button is active, Capture 2
will record that track as a stereo-interleaved file. By default, the mix mix track is stereo
linked.
Big Meter Mode.
The Big Meter Mode button is located in the upper right
corner of the Session page, above the editing tools.
When this button is engaged, the lower three-quarters of the Session page
will display detailed metering for every track. While in this mode, the Marker
Lane, transport, mode buttons, and editing tools will still be visible.
6.3.8 Markers and the Marker List
The Marker Lane.
The Marker Lane is located just below the Timeline Ruler.
It displays any markers you have created.
In Capture 2, the Marker Lane is used to place markers at desired
places in the timeline, after which navigation to the markers is easy.
Markers are also helpful when exporting your Session to individual
mixes or for editing in another recording application.
Power User Tip: We highly recommend that markers be inserted during the recording of a
live performance, as the markers will make the rest of the production process much easier.