User Manual

54
7 Studio One Artist Quick Start
7.2 Setting Up Studio One
StudioLive
™
ARc Series
Owner’s Manual
2. Click the Add button. This will launch the Add Device window.
3. From the menu on the left, select your MIDI controller from the list of
manufacturers and models. If you do not see your MIDI controller listed,
select New Keyboard. At this point, you can customize the name of
your keyboard by entering the manufacturer and device names.
4. You must specify which MIDI channels will be used to communicate with
this keyboard. For most purposes, you should select all MIDI channels.
If you are unsure of which MIDI channels to choose, select all 16.
5. Studio One allows you to filter out specific control functions. If you would
like Studio One to ignore Aftertouch, Pitch Bend, Program Change, or
All CC messages, enable filtering for any or all of these messages.
6. In the Receive From drop-down menu, select the MIDI interface
input from which Studio One Artist will receive MIDI data (that
is, the MIDI port to which your keyboard is connected).
Power User Tip: In the Send To drop-down menu, select the MIDI
interface output from which your Studio One Artist will send MIDI data
to your keyboard. If your keyboard controller doesn’t need to receive
MIDI data from Studio One, you can leave this unselected.