User Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 About This Manual
- 1.3 What is in the Box
- 1.4 What is in your My PreSonus Account
- 2 Getting Started
- 2.1 Level-Setting Procedure
- 3 Hookup
- 3.1 Connections and Controls
- 3.1.1 Inputs
- 3.1.2 Outputs
- 3.1.3 Rear Panel Connections
- 3.2 Channel Controls
- 3.2.1 Digital Returns
- 3.3 The Super Channel
- 3.3.1 Pairing a Bluetooth Device
- 3.4 Aux Buses
- 3.4.1 Monitor Bus Controls
- 3.4.2 Creating Monitor Mixes
- 3.5 Internal FX Bus
- 3.5.1 Effects Presets
- 3.5.2 Internal FX Bus Return
- 3.5.3 Creating Internal Effects Mixes
- 3.5.4 Using an External Effects Processor
- 3.6 Master Section Controls
- 3.6.1 Control Room Levels
- 3.7 Typical Band Setup Diagram
- 3.8 Typical Home Studio Setup Diagram
- 4 SD Recording and Playback
- 4.1 SD Recording
- 4.2 SD Playback
- 5 Connecting to a Computer
- 5.1 Installation for Windows
- 5.1.1 Universal Control (Windows only)
- 5.1.2 Loopback Recording (Windows only)
- 5.1.3 Using the StudioLive for System Sound
- 5.2 Installation for macOS
- 5.2.1 Using the StudioLive for System Sound
- 5.3 Using the StudioLive with Popular Audio Applications
- 5.4 Digital Sends and Returns
- 5.4.1 Digital Sends
- 5.4.2 Digital Returns
- 6 Capture 2
- 6.1 Installation Instructions
- 6.1.1 macOS
- 6.1.2 Windows
- 6.2 Start Page
- 6.2.1 Tagging and Organizing a Session
- 6.2.2 Creating a Session
- 6.2.3 Open a Session
- 6.2.4 Audio Device and Sample Rate
- 6.2.5 Options Menu
- 6.3 The Session Page
- 6.3.1 Track Column
- 6.3.2 Transport
- 6.3.3 Time Display
- 6.3.4 Timeline Ruler
- 6.3.5 Navigating the Session
- 6.3.6 Editing Tools
- 6.3.7 Meter Bridge
- 6.3.8 Markers and the Marker List
- 6.4 Recording a Session in Capture
- 6.5 Importing and Exporting Audio Files
- 6.5.1 Importing Audio Files into Capture
- 6.5.2 Export Audio Files
- 6.6 Mixing Your Capture Sessions
- 6.6.1 Exporting Your Final Mix to an Audio File
- 6.6.2 Mixing a Capture 2 Session in Studio One
- 6.6.3 Mixing a Capture 2 Session in a Different Recording Application
- 6.7 Capture 2 Key Commands
- 7 Studio One Artist Quick Start
- 7.1 Installation and Authorization
- 7.2 Setting Up Studio One
- 7.2.1 Configuring Audio Devices
- 7.2.2 Configuring MIDI Devices
- 7.3 Creating a New Song
- 7.3.1 Configuring Your I/O
- 7.3.2 Creating Audio and MIDI Tracks
- 7.3.3 Recording an Audio Track
- 7.3.4 Adding Virtual Instruments and Effects
- 8 Resources
- 8.1 EQ Frequency Guides
- 8.2 Block Diagrams
- 8.2.1 StudioLive AR16c, and AR12c Block Diagram
- 8.2.2 StudioLive AR8c Block Diagram
- 8.3 Recall Sheets
- 8.3.1 AR16c and AR12c Recall Sheet
- 8.3.2 AR8c Recall Sheet
- 8.4 Technical Specifications
- 9 Troubleshooting
- 9.1 Troubleshooting
71
9 Troubleshooting
9.1 Troubleshooting
StudioLive
™
ARc Series
Owner’s Manual
9 Troubleshooting
9.1 Troubleshooting
Please check the PreSonus Web site (www.presonus.com) regularly
for software information and updates, firmware updates, and support
documentation, including frequently asked questions.
Online technical support is available from within your My PreSonus account.
PreSonus telephone technical support is available to customers in the USA on
Monday through Friday from 9 a.m. to 5 p.m. Central Time by calling 1-225-
216-7887. Customers outside of the USA should contact their national or
regional distributor for telephone technical support. A list of international
distributors is provided at www.presonus.com/buy/international_distributors.
No Output on a Channel
Check the signal-present LED and verify that there is signal on that channel. If no
signal is present, check the cable and the input source. Verify that the trim control
is set at an appropriate level. Make sure the channel is not muted. Make sure that if
your device requires phantom power, phantom power is engaged for the channel.
No Output on the Solo Bus While Monitoring
Verify that both the Cue volume and the headphone, or monitor,
volume is at a reasonable level for comfortable listening and that
the PFL button is engaged on the desired channels..
Can’t Hear Main Mix in Headphones
Verify the headphone output control is at a sufficient level.
Make sure that no PFL or AFL buttons are engaged.
Control Room Level Not Affecting Volume
Verify that your monitors are connected to the Control Room
outputs of your StudioLive ARc, not the Main outputs.
Main Fader Doesn’t Control Mix Level
Verify that your monitors are connected to the Main
outputs, not the Control Room outputs.
Microphone Preamp 1 or 2 Doesn’t Pass Audio
First, verify that the Instrument input button is not engaged. This disables
the microphone preamp. Next, verify that your microphone cable is
operational and that the trim control is set at an appropriate level.