User Manual

7.5
Step Three: Remove Instruments
If you need to remove staves (as might happen if you created a new le from a template), click the button located to
the left of the instrument’s rst measure.
Step Four: Close Score Setup
When you nish selecting the instruments you want, click the Exit Score Setup button at the top of
the score area, or press the Esc key, or click the button in the toolbar, or press the keyboard
shortcut of Windows: Ctrl + T; Mac:  + T. Score Setup ends (the score area undarkens).
Step Five: Complete Initial Customization
Now, while you are in Edit mode (the Perform button in the Toolbar is unlit), you can
complete any or all the procedures in the remainder of this chapter.
TIP: At your rst opportunity, save your new le to your hard drive.
Remember to save the work you do at regular intervals.