User Manual
11. 11
> If the instrument you need is not on the list, then:
1. Press the New Instrument button in the lower left.
» The Sta Settings dialog box opens.
2. Select a sound source in the top drop-down box.
3. Select a particular instrument from a particular family.
NOTE: If you selected one of the four MIDI devices, then, strictly for your convenience, the default
instrument for each program number from the General MIDI specication appears. Of course, you
can have your MIDI device set up to produce a completely dierent instrument sound than those
listed here (use Sta Name and Abbreviation to identify the actual instrument name, for your
reference).
4. If you want, you can customize Sta Name and Abbreviation information.
5. Press OK.
» You return to the Change Instrument dialog box.
6. Press OK and proceed to Phase 2: Place New Instrument on Sta.
Phase 2: Place New Instrument on Sta
1. Ensure your Music Cursor currently displays the name of the new instrument (or MIDI channel).
2. Position the Music Cursor on the score at the particular sta, measure, and beat where you want the change.
3. Either click your mouse or press Enter.
» If the new part is a transposing instrument, then Notion automatically makes pitch/key changes from this point to
the end of the score (or until another instrument change) on this sta.
4. Repeat this procedure for the other voice (single sta ) or remaining three voices (grand sta).