User Manual
1.18
◙ MIDI IO Tab in Preferences.
1. Click the top drop-down list under the MIDI Input section.
» The list identies all MIDI devices registered and operating on your computer that are ready to send MIDI
information to applications such as Notion. Select one, or None; on a Mac, you also can enable All devices.
2. In Input type, specify if you will be using a MIDI keyboard (the default) or a MIDI guitar.
3. To nish: Windows: Click OK; Mac: Close the dialog box.
Set up four MIDI devices (MIDI Out)
Samplers, synthesizers, and similar MIDI devices provide digital samples of instruments and synthesized sounds.
You have the option of incorporating these sources alongside Notion’s built-in library. You can congure up
to four of these devices; each device will be referenced throughout Notion as the letter A, B, C, or D.
1. Go to the Menu bar and select File > Preferences.
» A Preferences dialog box opens.
2. Click the MIDI IOTab (see picture, top of page).
3. Use the four drop-down lists to assign up to four MIDI devices (already registered on your computer) to ports A
through D. Leave the default designation of None for any unused port.
4. To nish: Windows: Click OK; Mac: Close the dialog box.