User Manual

11
3 Connecting to a Computer
3.4 Using the Studio-series interfaces with Popular Audio Applications
Studio Series 1810 and 1824
Owner’s Manual
Avid ProTools 10+
1. Launch ProTools.
2. Go to Setup | Hardware and select Studio (1824 or 1810) from the Peripherals
list. Click OK.
3. Go to Setup | Playback Engine and select Studio (1824 or 1810) from the menu
at the top of the window. Click OK.
Cakewalk Sonar
1. Launch Sonar.
2. Go to Options | Audio... and click on the Advanced tab.
3. Change the Driver Mode to “ASIO.” (Note: Using WDM, rather than ASIO, for pro-
audio applications is not recommended.)
4. Click the “OK” button.
5. Restart Sonar.
6. Go to Options | Audio... and click on the Drivers tab.
7. Highlight all input and output drivers beginning with “PreSonus Studio 1824 or
Studio 1810.”
8. Go to Options | Audio... and click on the General tab.
9. Set the Playback Timing Master to “PreSonus Studio (1824 or 1810)... DAW Out
1.”
10. Set the Recording Timing Master to “PreSonus Studio (1824 or 1810)... Mic/Inst 1.”
Steinberg Cubase
1. Launch Cubase.
2. Go to Devices | Device Setup.
3. Select “VST Audio System” from the Devices column in the Device Setup.
4. Select PreSonus Studio (1824 or 1810) from the ASIO Driver dropdown list.
5. Click “Switch” to begin using the Studio-series driver.
6. Once you have successfully changed the driver, go to Devices | VST Connections
to enable your input and output buses.