User Manual

14
4 UC Surface Monitor Control Software
4.1 UC Surface Launch Window
Studio Series 1810 and 1824
Owner’s Manual
From Universal Control, you can enable or disable Loopback and pick
the streams on which the loopback audio will be recorded.
When Loopback is enabled and “Merge Loopback with 1/2” is selected,
the audio from another application will be recorded with the audio source
connected to analog inputs 1 and 2 on your Studio-series interfaces.
Media Player
Web Browser
Etc.
When Loopback is enabled and “Dedicated Loopback Inputs” is selected, the audio
from another application will be recorded on the last pair of driver inputs (19/20).
Media Player
Web Browser
Etc.
Power User Tip: When using either option, you will need to select Outputs 1 and 2 in the
audio application you want to record. Make sure to select Outputs 3 and 4 in the audio
application in which your recording to avoid a feedback loop.