User Manual

5 Studio One Artist Quick Start

5.2 Setting Up Studio One

Studio Series 1810c and 1824c

Owner’s Manual

5.2.1 Conﬁguring Audio Devices

1. In the middle of the Start page, you will see the Setup area. Studio One Artist

automatically scans your system for all available drivers and select a driver. By

default, it will choose a PreSonus driver if one is available.

Power User Tip: If your device has zero-latency monitoring functionality from within

Studio One, you will see the Z-mix icon. If you do not see this icon, make sure that you

have launched Universal Control. PreSonus audio interfaces require their DSP mixing

control panels to be running in the background for Z-mix functionality.

2. If you do not see your device listed on the Start page when you launch Studio

One, click on the Conﬁgure Audio Devices link in the Setup area to open the

Options window.

In the Options window, click on the Audio Setup tab and

select your device driver from the pull-down.

5.2.2 Conﬁguring MIDI Devices

From the External Devices window in Studio One Artist, you can conﬁgure

your MIDI keyboard controller, sound modules, and control surfaces. This

section will guide you through setting up your MIDI keyboard controller

and sound modules. Please consult the Reference Manual located within

Studio One for complete setup instructions for other MIDI devices.

If you are using a third-party MIDI interface or USB MIDI-controller

keyboard, you must install any required drivers for these devices before

beginning this section. Please consult the documentation that came

with your MIDI hardware for complete installation instructions.

If you do not have any MIDI devices, please skip to Section 5.3.