Owners Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 What is in the Box
- 1.3 Companion PreSonus Products
- 2 Hookup
- 2.1 Front Panel Connections and Controls
- 2.2 Back Panel Connections
- 2.3 Connection Diagram
- 2.3.1 Studio 1824c
- 2.3.2 Studio 1810c
- 3 Connecting to a Computer
- 3.1 Installation for Windows
- 3.2 Installation for macOS
- 3.3 Firmware Updates
- 3.4 Using the Studio-series interfaces with Popular Audio Applications
- 4 UC Surface Monitor Control Software
- 4.1 UC Surface Launch Window
- 4.1.1 Loopback Recording (Windows only)
- 4.2 UC Surface Controls
- 4.2.1 Channel Controls
- 4.2.2 Device Controls
- 4.3 The Settings Page
- 5 Studio One Artist Quick Start
- 5.1 Installation and Authorization
- 5.2 Setting Up Studio One
- 5.2.1 Configuring Audio Devices
- 5.2.2 Configuring MIDI Devices
- 5.3 Creating a New Song
- 5.3.1 Configuring Your I/O
- 5.3.2 Creating Audio & MIDI Tracks
- 5.3.3 Recording an Audio Track
- 5.3.4 Adding Virtual Instruments and Plug-in Effects to Your Song
- 5.4 Monitor Mixing with Z-Mix
- 5.4.1 Z-Mix Functions
- 6 Technical Information
- 6.1 Specifications
- 7 Warranty
- 7.1 Warranty Information
14
4 UC Surface Monitor Control Software
4.1 UC Surface Launch Window
Studio Series 1810c and 1824c
Owner’s Manual
• Recording a vocal in real time over a karaoke track
played from a web browser or media player.
Power User Tip: Because the Studio-series interfaces are class compliant Core Audio
devices, these virtual streams are not available in macOS. However, there are several
third-party applications that provide this functionality in macOS.
From Universal Control, you can enable or disable Loopback and pick
the streams on which the loopback audio will be recorded.
When Loopback is enabled and “Merge Loopback with 1/2” is selected,
the audio from another application will be recorded with the audio source
connected to analog inputs 1 and 2 on your Studio-series interfaces.
Media Player
Web Browser
Etc.
When Loopback is enabled and “Dedicated Loopback Inputs” is selected, the audio
from another application will be recorded on the last pair of driver inputs (19/20).
Media Player
Web Browser
Etc.
Power User Tip: When using either option, you will need to select Outputs 1 and 2 in the
audio application you want to record. Make sure to select Outputs 3 and 4 in the audio
application in which your recording to avoid a feedback loop.