User Manual

11
3 Connecting to a Computer
3.4 Controlling Studio 192 Mic Preamps from your DAW
Studio 192
Owner’s Manual
3.4 Controlling Studio 192 Mic Preamps from your DAW
Studio 192 microphone preamps can be controlled from the front panel, UC
Surface, or Studio One. If you configure your Studio 192 as a MIDI device inside
your DAW application, you can also control trim and phantom power from
within your DAW environment and store those settings with your session.
Below is a chart explaining the MIDI controls for your Studio 192 preamps:
Preamp MIDI Channel Trim Level Phantom Power ON /OFF
Preamp 1 Channel 1 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 2 Channel 2 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 3 Channel 3 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 4 Channel 4 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 5 Channel 5 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 6 Channel 6 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 7 Channel 7 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Preamp 8 Channel 8 CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)