User Manual
20
4 UC Surface Monitor Control Software
4.3 Dynamics Processing and EQ
Studio 192
Owner’s Manual
4.3.3 Fat Channel Presets
UC Surface provides 50 Fat Channel presets, giving you a quick way to set up
channels for monitoring. To access them, click on the Presets button from the Fat
Channel to open the Preset Manager.
1. Channel selection. Displays the currently selected channel. The preset
manager will automatically load and store presets to and from this
channel. Click on this menu to select a new channel to manage.
2. Preset category. Filters the preset list based on the selected category.
3. Add Preset (+). Creates a Fat Channel preset from
the currently selected channel’s settings.
4. Preset filters. Filters Fat Channel presets by module (gate, compressor/limiter, EQ).
To load any of these preset components, just click on the component’s button.
5. Load. Loads the current preset to the selected channel.
6. Audition. By engaging the Audition button, each preset will
nondestructively load into your channel with the currently enabled
filters. This lets you try out a preset before loading it and overwriting
the current settings. You can make changes to this preset in real time.
To load the settings you’ve auditioned, click the Load button.
7. Reset. Restores the Fat Channel to its default settings. The Preset Load
filters can be used to configure which settings will be reset.
8. Previous/Next channel. Selects the previous or next channel.
9. Copy/Paste. To copy the Fat Channel settings to another channel,
simply click on Copy, select the channel you’d like to load the
settings to from the Channel Select menu, and click Paste.
10. Fat Channel A/B. UC Surface lets you create two complete Fat Channel
settings and compare the two. In this way, you can experiment with a
new sound without having to struggle to re-create your old standby, and
after several minutes of careful adjustment, you can verify that a new Fat
Channel setting is better than it was before you started tweaking.
11. Close. Closes the Preset Manager and returns to the mixer view.
8 9 10 11
2
1
3
4
5
6
7