User Manual

21
4 UC Surface Monitor Control Software
4.4 Adding Effects
Studio 192
Owner’s Manual
4.4 Adding Effects
Your Studio 192 is equipped with two internal effects processors, each
with a dedicated mix bus. The processor for FXA is dedicated to reverb.
The processor for FXB is dedicated to delay effects. The effects returns
for both of these buses can be routed to any of the mixes.
Creating an effects mix is just like creating a monitor mix: Simply click on the effects
mix and select and set the level for each channel to which you would like to apply
reverb or delay.
Effects returns for each processor are available at the end of the input channels in
each mix.
4.4.1 Editing Effects and Effects Presets
To access the effects library for each processor and make adjustments to effects
parameters, click on the Edit button above the Flex fader for your effects mix.
You will see the effects editor in the Fat Channel area above the mix. From
here you can change the effects type, adjust parameters, and load presets.
Effects Presets. UC Surface contains a library of 50 custom reverb and delay
presets designed by PreSonus. In addition to these presets, you can create your
own custom effects library. Every factory preset can be altered, renamed, and
overwritten. You can create a custom preset using a factory preset as a starting
point or design a preset from scratch using an effects type of your choosing.