User Manual

37
5 Studio One Artist Quick Start
5.3 Creating a New Song
Studio 192
Owner’s Manual
2. Click on the Audio I/O Setup tab.
3. From the Inputs tab, you can enable any or all of the inputs on your PreSonus
Studio 192 audio interface that you’d like to have available. We recommend
that you create a mono input for each of the inputs on your interface. If you
plan on recording in stereo, you should also create a few stereo inputs.
Note: Studio 192 inputs that share mono and stereo buses will
always link the Fat Channel controls as stereo. Because of this, it is
recommended to have dedicated stereo and mono inputs.
4. Click on the Outputs tabs to enable any or all of the outputs on your
Studio 192 audio interface. In the lower right corner, you will see the
Audition select menu. This allows you to choose the output from which
you will audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the main output bus.
Power User Tip: If you would like this I/O configuration to be the same
every time you open Studio One, click the Make Default button.