User Manual

45
5 Studio One Artist Quick Start
5.4.2 Punching In
Studio 192
Owner’s Manual
You can choose to hide the preamp controls for your Studio 192 from the Console
Options menu. Simply uncheck the box next to “Show audio device controls.”
Note: Because preamp control for the DigiMax DP88 is bidirectional,
both the ADAT input and the ADAT output must be connected
in order for Studio One to display its preamp controls.
5.4.2 Punching In
The unique integration between the processing your Studio 192 and
Studio One makes punching in easier than ever. This section will guide
you through setting up a punch in so that there is no change sonically
between audio you’re playing back and the audio you’re recording.
1. Before you begin, go to Studio One>Preferences and click on the Advanced tab.
2. On the Console preference tab, check the box next to “Audio track
monitoring mutes playback (Tape Style). This will allow you use
Z-Mix to monitor during a punch in. Click Apply and then OK.