User Manual

2 Hookup

2.2 Back Panel Connections

Studio 2|6 and Studio 6|8

Owner’s Manual

2.2 Back Panel Connections

Headphone Output. The rear-panel headphone output can be switched between

playback streams 1/2 and 3/4, the same streams as the Main left/right outputs and

Outputs 3/4. These streams are switched via the Cue A/B button.

Mic/Line Inputs (Studio 6|8). These mic/line combo connectors are for use

with microphones on the XLR input and with line-level devices via the

¼-inch TRS connections.

Main Outs. These are the Main outputs for the Studio-series interface. The output

level of the Main outputs is controlled by the Main level control on the front of the

unit. Playback streams 1 and 2 are routed to these outputs.

Line Outputs. These ¼-inch, balanced line outputs allow you to route to external

devices, such as headphone amps, signal processors, and additional monitors. Each

output has an independent playback stream (Playback streams 3 and 4).