User manual

Table Of Contents
59
7 Capture
7.5 Virtual Soundcheck
StudioLive™ Software
Library Reference Manual
The Auxiliary Stereo Track in Capture is a stereo track intended to be used to record
a stereo mix from your StudioLive. This mix can be recorded while recording the
individual input channels so that a mix is available immediately after a live show,
or you can use this track to route your final studio mixes through the StudioLive.
Arming Tracks. To record to an audio track, the track must be record-
enabled, or armed. Capture 2 provides two Record Enable buttons for
each input: one on the track and on the meter bridge. Once an audio
track is record enabled, you are ready to record audio to that track.
Hit Record. To activate recording, click on the Record button in the transport. The
Record button will turn red, and the Play button will turn green. The playback cursor
will start to scroll from left to right from its current position, and new audio events
will be recorded to record-enabled tracks.
Recording will continue until you manually stop it by clicking on the Stop button in
the Transport or by pressing [Spacebar] on the keyboard.
When you press Record, the Session automatically locks. This prevents you from
accidentally stopping recording Session. You must disable Session Lock before you
can stop recording.
7.5 Virtual Soundcheck
We’ve all been there. The drummer is stuck in traffic. The guitarist is stuck at work.
And youre stuck at front-of-house (FOH) with a hyped up lead singer and bass player
and no way to dial in a front-of-house mix, let alone set up the singers in-ear mix.
Don’t panic! With Capture’s Virtual Soundcheck mode, dialing a good rough
mix without the band—or with half the band missing—is quick and simple.
1. To begin, create a new Session, preferably metatagged with the Artist,
Performance, and Location information.
2. From your empty Session, click on the Soundcheck Mode button
in the upper right hand corner of the Session page.