User Manual

7
2 Getting Started
2.3 Stagebox Modes
StudioLive™ Series III
Stagebox Mode Addendum
Monitor Mix
While this mode is active, the StudioLive Series III rackmount mixer retains
all its mixing functionality for every FlexMix, allowing you to create monitor
mixes and more using the FlexMix outputs. The Main Mix in this mode will not
be accessible or have any effect on the sound as this mix is sourced from the
Main Left/Right mix of the console mixer and must be controlled from there.
Power User Tip: The FlexMix outputs on your console mixer will remain active as well,
allowing you to use both sets of FlexMix outputs and, in effect, doubling your mixing
capability.
When Monitor Mix mode is active, preamp gain and phantom power control
cannot be controlled locally on the rack mixer. Your rack mixer preamps
will be controlled remotely via the Input section on the Fat Channel of
the console mixer when Network is selected as the Input Source.
Monitor Mix + Preamps
This mode functions the same as Monitor Mix mode, but adds remote preamp
control for either mixer from the rack mixer in addition to the console mixer. In
other words, when Network is selected as the Input Source for any channel on
either mixer, you can remotely control the preamp gain and phantom power.
Off
When “Off” is selected, the console and rack mixers will retain their AVB
input connectivity (i.e. all the inputs from the rack mixer will be available
on the console mixer and vice versa), but each mixer will source its
Main Left/Right and FlexMixes locally and preamp control will not be
available for the rack mixer from the top panel of the console mixer.