Data Sheet
2
12
OF
PG
June
2014
SL18sAI
1000-Watt
Subwoofer
®
Performance monitoring over:
• Excursion limiting
• Real-time temperature
• ADC clip detection
• Power-amp soft limiting
Individual speaker DSP settings:
• Polarity invert
• Speaker delay (up to 500 ms)
• Mute and solo
• Level
Group speaker management
• Group level control
• 31-band graphic EQ
• Store/load graphic EQ presets
• Speaker-group browser
• Store multiple speaker
groups together
• Custom labels for each
speaker and group
Settings are automatically stored
in the User Layer onboard each
loudspeaker for use away from SL
Room Control.
Optional Dante networking.
The SL-Dante-SPK upgrade
option card houses one Ethercon
connection for Dante™ audio
networking and remote control via
SL Room Control. It oers two Dante
Transmit and two Receive channels
and operates at 48 kHz.
Dante-enabled StudioLive AI-
series loudspeakers allow users
to create a complete, networked
audio system with any Dante-
enabled mixer using a standard 1
GB Ethernet switch and Audinate’s
SL328AI
SL312AI
SL315AI
SL18sAI
STUDIOLIVE 18sAI DIMENSIONS
STUDIOLIVE 18sAI DELAY MODES
21.6"
554 mm
24"
610 mm
26"
670 mm
0m – Full-range
speaker on sub pole
1m – Full-range speaker on
speaker stand
2m – Full-range speaker on stage
Dante digital-media networking
technology, which oers self-
configuring, true plug-and-play
digital audio networking.
Users can also connect non-Dante
mixers, such as a first-generation
StudioLive, to the analog inputs of
a Dante-equipped AI loudspeaker
and then broadcast the signal over
the Dante network using CAT5
cables. This makes Dante-enabled
StudioLive AI an ideal solution for
large front-of-house systems.