Owner`s manual

33
5 Technical Information
5.1 Specifications
StudioLive
™
AI-Series Loudspeaker
Owner’s Manual
5 Technical Information
5.1 Specifications
SLS312AI SLS315AI SLS328AI SLS18sAI
Acoustic Performance
Configuration
3-Way, Tri-amplified Loud-
speaker System
3-Way, Tri-amplified Loud-
speaker System
3-Way, Quad-amplified
Loudspeaker System
Powered Subwoofer, Ported
Frequency Response (-10 dB)
50 Hz - 23 kHz 46 Hz - 23 kHz 54 Hz - 23 kHz 29 Hz - 141 Hz
Frequency Response (-6 dB)
56 Hz - 22 kHz 52 Hz - 22 kHz 59 Hz - 22 kHz 32 Hz - 110 Hz
Nominal Coverage (-6 dB)
90 x 60 90 x 60 90 x 60 n/a
Maximum Peak SPL
131 dB 131 dB 133 dB 135 dB
Crossover Frequency
LF: (overlapped) 100 Hz - 1
kHz, HF: 1.8 kHz
LF: (overlapped) 100 Hz - 1
kHz, HF: 1.8 kHz
1.7 kHz n/a
Directivity Index (DI)
10 dB, >500 Hz 10 dB, >420 Hz 10 dB, >460 Hz n/a
Directivity Factor (Q)
10.0, >500 Hz 10.0, >420 Hz 10.0, >460 Hz n/a
Transducer
LF Transducer
12” Ferrite 15” Ferrite 2 x 8” Ferrite 18" Ferrite
Voice Coil Diameter
n/a n/a n/a 4"
MF Transducer
8” CoActual™ 8” CoActual™ 8” CoActual™ n/a
HF Transducer
1.75” Compression Driver 1.75” Compression Driver 1.75” Compression Driver n/a
Amplifier
Type
Class D Class D Class D Class D
Total Power Output
2000W (Total Power without
Protection Algorithms &
Limiter enabled)
2000W (Total Power without
Protection Algorithms &
Limiter enabled)
2000W (Total Power without
Protection Algorithms &
Limiter enabled)
1000W (Total Power without
Protection Algorithms &
Limiter enabled)
LF Power
2 x 500W Bridged 2 x 500W Bridged 2 x 500W 2 x 500W Bridged
MF Power
500W 500W 500W n/a
HF Power
500W 500W 500W n/a
Rated THD
< 0.05% (20 Hz - 20 kHz) < 0.05% (20 Hz - 20 kHz) < 0.05% (20 Hz - 20 kHz) < 0.05% (20 Hz - 20 kHz)
Dynamic Range
119 dB (A-weighted) 119 dB (A-weighted) 119 dB (A-weighted) 119 dB (A-weighted)
Bandwidth
20 Hz - 20 kHz 20 Hz - 20 kHz 20 Hz - 20 kHz 20 Hz - 20 kHz
Cooling
Free Air Convection Free Air Convection Free Air Convection Free Air Convection
Connections & Controls
Input Channels
1 Mic, 1 Line 1 Mic, 1 Line 1 Mic, 1 Line 2 Line
Input Connector Types
1 XLR(F), 1 Combo 1 XLR(F), 1 Combo 1 XLR(F), 1 Combo 2 Combo
Phantom Power
15VDC (CH1 only) 15VDC (CH1 only) 15VDC (CH1 only) n/a
Mic Input Impendance
1 kΩ 1 kΩ 1 kΩ n/a
Line Input Impedance
10 kΩ 10 kΩ 10 kΩ 10 kΩ
Maximum Input
+22 dBu +22 dBu +22 dBu +22 dBu
Output Connector
1 XLR(M) - Mix Out 1 XLR(M) - Mix Out 1 XLR(M) - Mix Out 2 XLR (M) - Thruput
Controls
Mic Level (Variable: Off to
+48 dB), Line Attenuation
(Variable: -24 dB to 0 dB),
Speaker Attenuation (Vari-
able: -24 dB to 0 dB)
Mic Level (Variable: Off to
+48 dB), Line Attenuation
(Variable: -24 dB to 0 dB),
Speaker Attenuation (Vari-
able: -24 dB to 0 dB)
Mic Level (Variable: Off to
+48 dB), Line Attenuation
(Variable: -24 dB to 0 dB),
Speaker Attenuation (Vari-
able: -24 dB to 0 dB)
Speaker Level (Variable -12
dB to +12 dB), Mono Sum
Indicators
DSP Preset, HPF On/Off, Net-
work Connected, Network
Activity, WiFi Setup, WiFi On,
Signal, Limit, Clip, Thermal
DSP Preset, HPF On/Off, Net-
work Connected, Network
Activity, WiFi Setup, WiFi On,
Signal, Limit, Clip, Thermal
DSP Preset, HPF On/Off, Net-
work Connected, Network
Activity, WiFi Setup, WiFi On,
Signal, Limit, Clip, Thermal
DSP Preset, Delay Preset,
Polarity Invert, Network
Connected, Network Activity,
WiFi Setup, WiFi On, Signal,
Limit, Clip, Thermal
Continued on the following page...