Owner's manual

Table of Contents
1 Overview — 1
1.1 Introduction — 1
1.2 About This Manual — 1
1.3 Summary of StudioLive 24.4.2/16.4.2
Hardware Features — 2
1.4 What is in the Box — 3
2 Getting Started — 4
2.1 Level Setting Procedure — 5
3 Hookup — 9
3.1 Rear-Panel Connections — 9
3.2 Basic Hookup Diagrams — 14
3.2.1 StudioLive 24.4.2 — 14
3.2.2 StudioLive 16.4.2 — 15
3.3 Basic Recording Diagrams — 16
3.3.1 StudioLive 24.4.2 — 16
3.3.2 StudioLive 16.4.2 — 18
3.4 Typical Band Setup Diagrams — 20
3.4.1 StudioLive 24.4.2 — 20
3.4.2 StudioLive 16.4.2 — 22
3.5 Typical Church Setup Diagrams — 24
3.5.1 StudioLive 24.4.2 — 24
3.5.2 StudioLive 16.4.2 — 26
4 Controls — 28
4.1 The Fat Channel — 28
4.1.1 Select Buttons, Meters,
and the Fat Channel — 28
4.1.2 Fat Channel Processing
Guide — 29
4.1.3 Fat Channel: Dynamics
Processing and EQ — 30
4.1.4 Fat Channel Panning, Stereo Link,
and Link Master — 37
4.1.5 Fat Channel: Subgroup and Main
Output Assignments — 38
4.1.6 Copying Fat Channel
Settings — 38
4.1.7 Loading Fat Channel
Presets — 39
4.1.8 Saving Fat Channel
Presets — 39
4.1.9 Channel Presets Library — 40
4.2 Metering — 41
4.2.1 StudioLive Metering
Controls — 41
4.3 Input Channel Strip — 42
4.3.1 Input Channel Controls — 42
4.4 Aux and FX Buses — 44
4.4.1 Analog Aux Bus Controls — 44
4.4.2 Internal FX Bus Controls — 44
4.4.3 Aux and FX Bus
Channel Sends — 45
4.4.4 Creating Monitor Mixes — 46
4.4.5 Creating Internal FX Mixes — 47
4.4.6 Using an External
Effects Processor — 48
4.5 Subgroups — 49
4.5.1 Subgroup Controls — 49
4.5.2 Creating Instrument
Subgroups — 50
4.5.3 Creating Effects Groups — 51
4.6 Main Output Bus — 53
4.7 Master Section — 53
4.7.1 Aux Inputs A and B — 53
4.7.2 Talkback System — 54
4.7.3 2 Track In — 54
4.8 Solo Bus — 55
4.8.1 Solo Bus Controls — 55
4.8.2 Using the Solo Bus
for Monitoring — 56
4.8.3 Using Solo in Place (SIP)
to Set Up a Mix — 57
4.9 Monitor Bus — 59