User Manual

18
4 Basic Mixing and Routing
4.3 User Fader Layer
StudioLive™ Series III
Owner’s Manual
4.3 User Fader Layer
The User layer lets you choose a hand-picked selection of channels that are visible
when you press the User button. This can be useful to access crucial channels quickly,
especially in mixes with high channel counts.
To assign channels to the User layer, do the following.
1. Navigate to the User layer by pressing the User button.
2. Press Select on a channel strip to which you wish to assign a mixer channel
or any unused channel in the user layer.
3. The User Layer Assignment screen will be displayed on the touchscreen.
4. Select the channel of your choice on the touchscreen to assign it to the
channel strip of your choice.
5. Repeat steps 2-4 as necessary to populate the User layer with your most
needed channels.
6. Press Done when finished.
To Edit the User layer, press and hold the Select button for the channel whose
assignment you’d like to change. This will open the User Layer Assignment screen.
From here you can unassign the channel completely or change the channel assigned
to it. Every channel, mix master, and DCA group master is available to assign to the
User Layer.