User Manual

4 Basic Mixing and Routing

4.6 FlexMixes

StudioLive™ Series III

Owner’s Manual

4.6.1.2 Working with External Eﬀects Processors

Creating a mix to send to an external eﬀects processor is similar to creating an

internal FX mix, only in this case, we route the mix signal to a mix output (Mix Output

7, in this example), and route the eﬀected signal from the processor back to a stereo

Aux input (Aux Input 1, in this example) on the mixer. If your eﬀects processor is

mono, connect its output to the L (left) jack of the Aux Input.

1. Connect Aux Output 7 to the input of your external eﬀects processor, and

connect the outputs of the processor to the Aux Input 1 jacks.

2. Press the Main Mix button.

3. Press the Next button to bring the Aux Input channel layer.

4. Press the Select button that corresponds to Aux Input 1 (the input pair

you’re using as an eﬀects return), to access its settings in the Fat Channel.