User Manual

27
4 Basic Mixing and Routing
4.6 FlexMixes
StudioLive™ Series III
Owner’s Manual
5. In the Fat Channel, press the Stereo Link button.
6. Assign the Subgroup to the Main bus by pressing the Main assign in the
Fat Channel.
7. Turn the Pan knob all the way clockwise to set the stereo pan to hard left
and right. Now Subgroups 1 and 2 are linked, with Sub 1 panned hard left
and Sub 2 panned hard right. The channel panning is preserved.
Now that we’ve created a stereo subgroup, let’s make an instrument group:
1. The first step is to get a good mix of the instruments you are grouping—in
this case, the drums. Beginning with Channel 1 (Kick), raise the fader and,
with the drummer’s assistance, set the input trim, EQ, and dynamics for each
drum separately.
2. As you select each channel and dial in its Fat Channel settings, assign each
channel to be routed to Subgroups 1 and 2 and unassign it from the Main
bus. When you are done with each channel, lower the fader before moving
on. When you get to Channels 7 and 8 (Overheads), you may want to
consider stereo linking them.
For more information on Subgroup routing assignments, please refer to
Section 5.5.
Page
(Insert)
Input Mic/Line Assign
Channel
Stereo
Processor
OL
-2
-12
-24
-36
-48
-65
Level
Page
(Insert)
Input Mic/Line Assign
Channel
Stereo
Preset
Comp
Processor EQ / Dyn
OL
-2
-12
-24
-36
-48
-65
Level