User Manual

28
4 Basic Mixing and Routing
4.6 FlexMixes
StudioLive™ Series III
Owner’s Manual
3. After you have gone through the entire kit and are satisfied with each
channel’s EQ and dynamics, have the drummer play the entire kit, and select
the Mix 1 in the Mix Select area and set the relative volume and panning for
each mic in the mix.
4. Press the FlexMix fader’s Select button to use the Fat Channel section to
add dynamics processing and EQ to the stereo drum group.
4.6.3 Matrix Mixes
On the simplest level, a matrix mix is a mix of mixes. A matrix mix allows you to
combine any bus on your StudioLive as well as input channels. Matrix mixes can be
the Swiss Army knife to solve some of the most problematic audio routing issues.
Here are some of the most common uses:
• Feeding the house mix to multiple locations (i.e. the lobby, a webcast feed)
• Creating a front fill mix
To create a Matrix Mix:
1. Press the Mix Select button for the FlexMix Master you’d like to make a
Matrix mix.
2. Press the Settings button on the Master Control Touchscreen.
3. Press the Matrix button under FlexMix Mode
When you select your Matrix mix, the StudioLive buses will be on the first layer of
inputs followed by the input channels.
Sub/Matrix Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
BANK
Mix 1
Mix 3
Mix 5
Mix 7
Mix 2
Mix 4
Mix 6
Mix 8
Mix 9
Mix 11
Mix 13
Mix 15
Mix 10
Mix 12
Mix 14
Mix 16
Mix 1
Sub/Matrix Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
BANK
Mix 1
Mix 3
Mix 5
Mix 7
Mix 2
Mix 4
Mix 6
Mix 8
Mix 9
Mix 11
Mix 13
Mix 15
Mix 10
Mix 12
Mix 14
Mix 16
Mix 1