User Manual

30
4 Basic Mixing and Routing
4.8 Fixed Subgroups
StudioLive™ Series III
Owner’s Manual
4.8 Fixed Subgroups
In addition to the 16 FlexMixes, StudioLive mixers are equipped with four subgroups.
Like the FlexMix Subgroups, the StudioLive allows you to group channels and apply
the Fat Channel’s noise gate, limiter, compression, and EQ to the group as a whole,
in addition to the processing available for each channel. Subgroups can be soloed
and muted. The StudioLive 32 provides dedicated Subgroup outputs on the back
panel. Subgroups on the StudioLive 24 and 16 can be routed to the AVB network.
To view the fixed Subgroups, press the Mix/FX Masters button. This will bring up the
master output control for every output bus.
Use the Next button to bank to the end of the FlexMixes.
To add a channel to a fixed Subgroup:
1. Select the channel and press the Subgroup button in the Assign section of
the Fat Channel. This will bring up the Assigns menu on the Touchscreen.
2. The four fixed Subgroups are at the top of the screen. Touch the Subgroup
to which you’d like to assign the channel.
For more information on Subgroup routing assignments, please refer to
Section 5.5.
4.9 Talkback System
The StudioLive features a Talkback microphone input on the back panel. This can be
routed to your choice of Aux outputs, as well as the Main output. The talkback signal
is silent by default.
To enable talkback, press the Talk button.
To adjust the Talkback level in any mix, Press the Aux Inputs button and use the
Talkback channel fader to set the desired level.
Page
(Insert)
Input Mic/Line Assign
Channel
Stereo
Preset
Comp
Processor EQ / Dyn
OL
-2
-12
-24
-36
-48
-65
Level