User Manual

32
5 The Fat Channel
4.9 Talkback System
StudioLive™ Series III
Owner’s Manual
5 The Fat Channel
The Fat Channel gives you powerful signal processing, mixing, and configuration
tools for each channel and bus on your StudioLive.
To begin working on a channel or mix with the Fat Channel, simply press its Select
button. When you press a Select button, the number (and name, if applicable) of the
selected channel or mix is shown on the touchscreen.
Mix Select buttons can be accessed one of two ways:
• Press the Mix/FX Masters button in the Bank section. This makes the mix and
bus master faders available on the channel strips. Then, you can press the Select
button that corresponds with the mix or bus you want to work with, bringing it
into focus in the Fat Channel.
• Press the Mix Select button that corresponds with the mix or bus you want to
work with. The Master fader on the mixer surface then addresses the master fader
for that mix or bus. Press the Select button above the Master fader to access Fat
Channel controls for that mix or bus.