User Manual

49
5 The Fat Channel
5.1 Fat Channel Navigation
StudioLive™ Series III
Owner’s Manual
5.1.4.3 Vintage 1970s EQ
When the Vintage 1970s EQ is selected, the following controls are available in the Fat
Channel:
H-MID
H-MIDL-MIDL-MIDLOWLOW
Gain Freq Gain Freq Gain Freq Gain
HIGH
0.004.8 kHz0.00 dB700 Hz0.00 dB60 Hz0.00 dB
1 2 3 4 5 6 7
1. Low Gain. Sets the amount of boost or cut to apply the low-frequency band of
this EQ.
2. Low Frequency. Sets the shelving frequency of the low-frequency band of this
EQ.
3. Lo-Mid Gain. Sets the amount of boost or cut to apply the low-mid-frequency
band of this EQ.
4. Lo-Mid Frequency. Sets the center frequency of the low-mid-frequency band of
this EQ.
5. Hi-Mid Gain. Sets the amount of boost or cut to apply the high-mid-frequency
band of this EQ.
6. Hi-Mid Frequency. Sets the center frequency of the high-mid-frequency band
of this EQ.
7. High Gain. Sets the amount of boost or cut to apply the high-frequency band of
this EQ.
Press the Processor button to turn the EQ on or off.
When the Fat Channel is in Vintage EQ mode, the touchscreen shows an overview
screen, displaying the relevant parameters (as available in the Fat Channel).
1
2 3 4 5 6 7 8
1. EQ On/Off. Enables/disables the EQ globally. Touch to toggle on or off.
2. Low Frequency. Sets the shelving frequency for the Low Band.
3. Low Gain. Sets the Gain for the Low Band.
4. Low-Mid Frequency. Sets the center frequency for the Low-Mid Band.
5. Low-Mid Gain. Sets the Gain for the Low-Mid Band.
6. High-Mid Frequency. Sets the center frequency for the High-Mid Band.
7. High-Mid Gain. Sets the Gain for the High-Mid Band.
8. High Gain. Sets the Gain for the High Band.