User Manual

53
5 The Fat Channel
5.5 Output Assignment Buttons
StudioLive™ Series III
Owner’s Manual
5.5 Output Assignment Buttons
When an input channel is selected, you can use these buttons to assign it to an
output path. Press Main to send the selected channel output to the Main bus. Press
SubGrp to send the channel output to a subgroup.
You can assign a channel output to a subgroup in two different ways:
Press the Subgroup button and release it, the Subgroup Assignment view shows in
the touchscreen, with a list of all available subgroups. You can then touch the desired
subgroup to route the channel to the subgroup of your choice.
To quickly assign a channel to multiple FlexMix Subgroups at once:
1. While the channel is selected, press and hold the SubGrp button in the
Assign section of the Fat Channel.
2. The available subgroup FlexMix select buttons will flash. Press the FlexMix
select buttons for the subgroups to which you’d like to assign the channel.
Page
(Insert)
Input Mic/Line Assign
Channel
Stereo
Preset
Comp
Processor EQ / Dyn
OL
-2
-12
-24
-36
-48
-65
Level
Sub/Matrix Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
Sub/Matrix
BANK
Mix 1
Mix 3
Mix 5
Mix 7
Mix 2
Mix 4
Mix 6
Mix 8
Mix 9
Mix 11
Mix 13
Mix 15
Mix 10
Mix 12
Mix 14
Mix 16
Mix 1