User Manual

55
5 The Fat Channel
5.8 Copy/Paste & Preset Load/Save
StudioLive™ Series III
Owner’s Manual
5.8 Copy/Paste & Preset Load/Save
Press Copy to copy Fat Channel settings from the currently selected channel to one
or more other channels. Once Copy is pressed, the Select buttons for all other
channels start blinking. Press the Select button on any channels to which you want
to copy Fat Channel settings from the currently selected channel.
Press Load to paste the settings to the selected channels.
The Save and Load buttons let you save and load Fat Channel presets, letting you
store and reapply useful Fat Channel processing and utility settings to future mixes.
While all Fat Channel settings are included when you save a preset, you can choose
to filter out some types of settings, to load only part of a preset (such as only EQ and
compressor parameters).
To save a preset:
1. Press Save. The Fat Channel Presets view is shown on the touchscreen.
2. Press the Store button in the Master Control area to bring up the onscreen
keyboard. Enter your preset name with the keyboard, and choose a
category (such as Kick Drum or Guitar) from the Category selector, if desired.
3. Press the Enter button on the keyboard to save your preset, or press the
back-arrow to cancel and exit this screen.
To load a preset:
1. Press Load. The Fat Channel Presets view is shown on the touchscreen.
Page
(Insert)
Input Mic/Line Assign
Channel
Stereo
Preset
Comp Gate
Processor EQ / Dyn
FX C
FX A
EFFECTS MASTER
-2
-12
-24
-36
-48
-65