User Manual

56
5 The Fat Channel
5.8 Copy/Paste & Preset Load/Save
StudioLive™ Series III
Owner’s Manual
2. To partially load a preset (say, EQ parameters only), press the relevant
buttons in the Filter column to disable loading for one or more processors.
3. To filter the presets by channel category (such as Kick Drum or Guitar), make
a selection from the Category selector.
4. Select a preset and load it by pressing the Recall button in the Master
Control area.
You can also momentarily audition the effects of a preset by selecting a preset and
pressing the Audition button on the touchscreen, or rename it by pressing Rename
and entering a new name with the onscreen keyboard.
If you need finer control of which Fat Channel settings are included when copy/
pasting or loading presets, press Advanced Recall to open the Copy/Paste &
Preset Filtering screen. In this screen you can set the exact parameter types that are
included in each these two preset actions. Click Copy/Paste and press the desired
parameter buttons to filter parameters for copy/paste actions. Click Preset Load to
do the same for preset loading actions.