User Manual

64
8 Master Control
8.1 Home Button Features
StudioLive™ Series III
Owner’s Manual
8.1.1 System Screen
The System screen gives you access to many useful settings and functions that let
you choose how your StudioLive looks and operates. The following functions are
available:
5
6
7
8
9
1
4
3
2
1. Sample Rate. Displays the mixer’s sample rate. StudioLive Series III mixers have
a fixed sample rate of 48 kHz.
2. Show Peak Hold. Toggle this option on to enable peak hold mode for the
various meters throughout StudioLive. When enabled, an indicator segment is lit
on each meter, showing the highest point in the amplitude scale that the related
signal has reached.
3. LED Brightness. Gives you a range of brightness settings for the LEDs. Choose
Low, Mid, or High brightness for each.
4. Backlight Brightness. Sets the brightness for the scribble-strip displays and
touchscreen. Choose between Low of High
5. Link Aux Mutes. Lets you select a mode of operation for linking mute buttons
between channels and aux sends. For more information, see Section 8.1.1.5.
6. Fat Channel Load/Paste Filters. Lets you choose which parameters are
included when you load a Fat Channel preset or copy/paste Fat Channel settings
between channels. For more information, see Section 8.1.1.3.
7. Firmware. Shows the currently installed version of the StudioLive firmware,
and offers functions for installing firmware updates. For more information, see
Section 8.1.1.4.
8. Permissions. Lets you configure StudioLive control permissions for any
connected compatible controllers. For more information, see Section 8.1.1.1.
9. User Button Assigns (StudioLive 32 and 24 only). Lets you set the functions of
the User Buttons. For more information, see Section 8.1.1.2.
8.1.1.1 Permissions
Controlling your StudioLive remotely with UC Surface or QMix-UC for mobile devices
allows you to move about the venue freely. However, it can also put the full power
of the your mixer in multiple hands— some more adept than others. Therefore, your
StudioLive enables you to limit each wireless device’s access to the mixer features by
setting permissions.
From the System menu press the Permissions button to set the level of control
available to each user. At the top of the screen is a Device/User selector, which lets
you choose which of the connected devices for which to set control permissions.
Depending on the type of device you choose (QMix-UC or UC Surface), the screen
shows different options: