User Manual

86
10 Graphic EQ
10.1 Assigning GEQs
StudioLive™ Series III
Owner’s Manual
10.1 Assigning GEQs
To assign a Graphic EQ to one of the mixes, select the desired mix and press the GEQ
button. This will open the GEQ screen:
Press the Assign button to select the mix(es) on which you’d like to insert a GEQ.
Touching a mix will insert a Graphic EQ post-fader:
On the upper right hand side of the screen, you will see how many GEQs are available
to be assigned.
You will be alerted when all eight GEQs have been assigned.
Once assigned, you can access the GEQ at any time by pressing the GEQ button on
your desired mix:
Use the Fat Channel encoders to control the Graphic EQ in banks of eight. Use the
Master Control encoder to scroll to a different bank.
10.2 Using the GEQ
1
2 4 53 6 87
1. On/Off. Use this button to enable/disable the current GEQ.
2. Current Bank. By default, the GEQ is controlled from the Fat Channel encoders
in banks of eight. This highlights the bank that is currently being controlled from
the Fat Channel. Use the value encoder to move to another bank.
3. Assign. Opens the Assign GEQ screen. See Section 10.1.
4. Reset. Press this button to flatten the GEQ.