User Manual

7
2 Getting Started
2.1 Level Setting Procedure (Full-Range)
StudioLive
™
AI-Series Loudspeaker
Owner’s Manual
6. Power on your StudioLive loudspeaker.
7. Turn the Speaker level knob to the 12 o’clock position.
8. While speaking into the microphone, use the Mic level knob to adjust the
microphone level. Be sure that you are not standing directly in front of the
loudspeaker while doing this, as doing so could
result in feedback. If you are not using the Mic
input, it is recommended that you leave this knob
in the O position so as not to introduce noise
into your signal path.
9. With audio playing through your line-level source, turn the Line level knob
until you have achieved a comfortable listening volume. If you are not using
the Line input, it is recommended that you leave this knob in the -24 dB
position so as not to introduce noise into your signal path.