Manual

12
3 Hookup
3.1 Rear-Panel Connections
StudioLive™ AI-series Mixers
Owner’s Manual
Tape In/Out. The StudioLive is equipped with stereo RCA inputs and outputs that
can be used to connect a tape deck, CD player, or other consumer device. The
tape-input level is controlled by the 2 Track In knob on the top panel. The Main bus is
routed post-fader to the tape output.
CR Outputs. These are the balanced control-room outputs. The level is controlled by
the Monitor knob in the Monitor section on the top panel.
Pre-Insert Balanced Direct Outputs. These are the balanced, direct
analog outputs for the 32/24/16 channels. The DB25 connectors divide
the channels into groups of eight. Balanced DB25 fan-out snakes can
be obtained in various configurations at most recording and live-sound
retailers. Common fan-outs are DB25 to (8) XLRM and DB25 to (8) TRS.
These outputs are post-gain, pre-insert, and pre-A/D converter. Only the
microphone preamps and line-level inputs are available through the direct
outputs. The digital returns cannot be patched to the direct outputs.
DB25 pin-outs: H = Hot C = Cold G = Ground
Power-cable Input. This is where you plug in the provided IEC power cable.
Power Switch. Push the top part of the switch ( | ) to turn on your StudioLive. Push
the bottom part of the switch ( O ) to turn it off.
13 12 11 10 9 8 7 6 5 4 3 2 1
25 1415161718192021222324
C G H C G H C G H C G HG CHGCHGCHGCH
17 18 19 20 21 22 23 24
13 12 11 10 9 8 7 6 5 4 3 2 1
25 1415161718192021222324
C G H C G H C G H C G HG CHGCHGCHGCH
1 2 3 4 5 6 7 8
13 12 11 10 9 8 7 6 5 4 3 2 1
25 1415161718192021222324
C G H C G H C G H C G HG CHGCHGCHGCH
9 10 11 12 13 14 15 16
Pre-Insert Balanced Direct Outputs
13 12 11 10 9 8 7 6 5 4 3 2 1
25 1415161718192021222324
C G H C G H C G H C G HG CHGCHGCHGCH
25 26 27 28 29 30 31 32