Manual

25
4 Controls
4.1 The Fat Channel
StudioLive™ AI-series Mixers
Owner’s Manual
High-Mid EQ Q Control
(32.4.2AI and 24.4.2AI only).
Sets and Displays the Q of the
High Mid Frequency Band.
This encoder sets, and the
meter displays, the Q for the
High-Mid band. The Q is the
ratio of the center frequency
to the bandwidth. When the
center frequency is constant,
the bandwidth is inversely
proportional to the Q, so as
you raise the Q, you narrow the
bandwidth. 16.4.2AI users can
access the variable High-Mid EQ
Q Control from VSL-AI and SL
Remote-AI.
Please Note: While the StudioLive
16.4.2AI doesn’t have a variable Q
control for any of its bands from its
control surface, it does offer a Hi Q
button for the High-Mid Frequency
Band. This button will narrow the
Q of the High-Mid Band to 2.0 to
provide more exact control. By
default, the High-Mid Q is set to
0.55. As previously mentioned, fully
variable Q control for all bands is
available from SL Remote-AI
and VSL-AI.
High-Mid EQ Gain Control. Sets
and Displays the Gain
Attenuation or Boost at the
Center Frequency.
This encoder sets, and the meter
displays, the gain cut or boost at
the center frequency of the High-
Mid band. The level of the center
frequency can be set between
-15 and +15 dB.
High EQ On/Off Button. Turns
the High EQ On/Off for the
Selected Input or Output Bus.
This button activates the High
band for the selected channel or
bus. The button will illuminate
to indicate control is active.
The High EQ band is available for
all 32/24/16 input channels and
every output bus.
High EQ Frequency Control.
Sets and Displays the Center
Frequency of the High EQ.
This encoder sets, and the meter
displays, the center frequency
of the High band. You can adjust
the center frequency from 1.4 to
18 kHz.
High EQ Q Control (32.4.2AI
and 24.4.2AI only). Sets and
Displays the Q of the High
Frequency Band.
This encoder sets, and the meter
displays, the Q for the High band.
The Q is the ratio of the center
frequency to the bandwidth.
When the center frequency
is constant, the bandwidth is
inversely proportional to the Q,
so as you raise the Q, you narrow
the bandwidth. 16.4.2AI users
can access the variable High EQ
Q Control from VSL-AI and SL
Remote-AI.