Manual

56
4 Controls
4.9 Solo Bus
StudioLive™ AI-series Mixers
Owner’s Manual
2. Press and hold the SIP button in the Solo section until it illuminates.
3. Raise all your channel faders and your main fader to unity gain.
4. Most engineers start with the drums and work from the bottom up, so press the
Solo button on your kick-drum mic channel. Notice that all the other channels on
your StudioLive have been muted, and the kick-drum channel is selected.
5. The Fat Channel will display the dynamics processing, EQ,
output routing, and pan settings for the kick drum.
6. Using the encoders and meters in the Fat Channel, set
up the compressor and EQ for this channel.
Kick SnareTop SnareBOT HighHat Tom 1 Tom 2 Floor Tom