Manual

61
5 Digital Effects | Master Control
5.2 The Digital FX (Effects) Menu
StudioLive™ AI-series Mixers
Owner’s Manual
5.2.1 Creating FX Presets
Page 1 of the FX menu provides access to your library of effects
presets. Pages 2-5 provide access to the 13 FX types. An FX preset
is made by adjusting the default parameters of an FX type, so one
FX type can be the foundation for many different presets.
The StudioLive contains a library of 50 custom reverb and delay presets designed
by PreSonus. In addition to these presets, there are 148 available locations for your
custom effects library. The factory presets can be altered, renamed, and overwritten.
Create an FX preset using a factory preset as a jumping-off point, or start from
scratch with an FX type of your choosing. This section describes the latter approach.
1. Navigate to page 2 of the FX menu or press FX A’s Select button.
2. Using the Value encoder, navigate through the FX Type
library until you find the FX type you’d like to use.
3. Press the Recall button to load the FX type and its default parameters.
4. Use the Next button and the Value encoder to dial in your FX
preset to taste.
5. Page 6 allows you to store your changes to presets loaded on
any of the FX buses to the same location, or to a new
location, and to customize the name of your creation.