Owner manual

3 Networking Your StudioLive AI mixer
3.5 Step 5: Setting iOS Permissions
StudioLive
™
AI Software Library
Reference Manual
17
3.5 Step 5: Setting iOS Permissions
Controlling your StudioLive remotely with StudioLive Remote-AI for iPad or
QMix-AI for iPhone/iPod touch allows you to move about the venue freely.
However, it can also put the full power of the StudioLive in multiple hands—
some more adept than others. Therefore, your StudioLive enables you to limit
each iOS device’s access to the mixer features by setting permissions.
Once an iOS device is connected to your wireless network and has launched
SL Remote-AI or QMix-AI, the device will be displayed in the Remote Devices
list on the System Menu on your StudioLive. Each device will be listed using its
device name so you can easily identify which device is which. This name can
be changed in iTunes or in the General>About settings on the iOS device.
Once you have connected and configured an iOS device, the same permissions
will be set for that device every time you connect it. Complete information
about SL Remote-AI and QMix-AI can be found in Sections 5 and 6.
Note: You must give permission to an iOS device from the StudioLive System menu
in order to remote control your StudioLive AI-series mixer from that device.
1. Press the System button on your StudioLive to launch the System menu.
2. Page down to navigate to Page 3: iOS Setup.
3. Use the Value encoder to scroll through the list of available iOS devices.
4. When you find the device for which you’d like set permissions, use the Next button
to navigate to the first permissions field. Use the Value encoder to set the device
permission.