Owner manual

4 Universal Control-AI and VSL-AI
4.5 Loading Scenes and Presets from VSL-AI
StudioLive
™
AI Software Library
Reference Manual
29
4.5 Loading Scenes and Presets from VSL-AI
As stated in earlier, the browser window in VSL-AI functions in much the same way
as the browser in Studio One. To load a scene or preset from the browser window,
simply select it and drag it over the mixer or channel on which you wish to load
it. Scenes and presets can be dragged from either the On the Disk or the Device
Memory section of the browser and dropped onto the Overview or the Channel tab.
4.5.1 Loading a Scene
To load a new scene on your StudioLive, select it from the browser window and drag
it over the mixer in either the Overview or the Channel tab. The window will gray out,
indicating that a new scene is about to be loaded. Note that only the parameters
that have been enabled for recall on the StudioLive will be recalled on the mixer.
4.5.2 Loading Scribble-Strip Labels
Scribble-strip labels are stored with your scenes. You can load just the labels by
selecting the scene from the browser and dragging it over the row of scribble
strips above the channel faders. The scribble strips will gray out, indicating
that the scribble-strip labels from the scene are about to be loaded.
4.5.3 Loading a Fat Channel Preset
To load every component in a Fat Channel preset (gate, compressor, EQ, etc.), select
the preset from the browser and drag it over any part of the desired channel.